2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Misfire Cylinder 5 - Questions

Thread Tools
 
Search this Thread
 
Old Mar 25, 2011 | 09:32 AM
  #1  
mcvoss's Avatar
mcvoss
Thread Starter
|
Registered User
Joined: Dec 2009
Posts: 22
Likes: 0
Default Misfire Cylinder 5 - Questions

Hello Folks,

My daughter has a 2001, 3.9, manual Dodge Dakota. She's been having periodic issues of the engine loosing power. This has been going on for about one week and is very sparadic. She called me yesterday and I had her take it to Autozone for a code scan. It came back bad O2 sensor and misfire in cylinder 5. O2 sensor is no big deal as far as the misfire besides checking the plugs and wires anything else I should be looking for? I believe I changed the plugs around 20k mikes ago.

She's goes to college a few hours away and I was going to drive up tomorrow to look at it.

Thanks in advance for your help.
 
Reply
Old Mar 28, 2011 | 11:58 AM
  #2  
GrnDak01's Avatar
GrnDak01
Rookie
Joined: Mar 2011
Posts: 51
Likes: 0
From: St. Ann, MO
Question

Bump.
 
Reply
Old Mar 28, 2011 | 12:15 PM
  #3  
frydaddy82's Avatar
frydaddy82
Veteran
Joined: Jan 2011
Posts: 291
Likes: 1
From: easter north carolina
Default

i would go ahead and put a new set of plugs in it. couldnt hurt right. i hear a lot about these trucks liken auto lights the best. maybe some one els will chim in.
 
Reply
Old Mar 28, 2011 | 01:05 PM
  #4  
Blaze10's Avatar
Blaze10
Record Breaker
Joined: Jul 2009
Posts: 1,031
Likes: 0
From: Clinton County, Pa
Default

yeah autolite plugs are good, i am guess you did a full round of plug, plug wire, distributor cap and rotor right? or atleast check the plug on cylinder 5 to see if it's getting spark
 
Reply




All times are GMT -4. The time now is 04:21 AM.