2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

2003 Dakota 4.7L ******HELP******

Thread Tools
 
Search this Thread
 
Old Oct 24, 2012 | 01:13 PM
  #1  
Bravocompany's Avatar
Bravocompany
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 1
Likes: 0
Unhappy 2003 Dakota 4.7L ******HELP******

Hi

I am in deep trouble my truck suddenly started to leak antifreeze coming out of what appeared to be the front part of the fan (don't know if it was the water pump?) l'm looking for leaks... it was a mess the fan was throwing the stuff all over the engine and hood it was hard to see where it was coming from?

Also when this whole thing with the antifreeze leak started my steering wheel began to be hard to turn?

I'm guessing it was antifreeze leaking even though it looked kind of oily and also my truck began to overheat.

Please Help.................

Thank You!!!!!!!!!!!!!!!!
 
Reply
Old Oct 25, 2012 | 12:37 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

I will move this to the 2nd generation Dakota sub-forum.
 
Reply
Old Oct 25, 2012 | 12:52 PM
  #3  
sl2racer's Avatar
sl2racer
Veteran
Joined: Aug 2009
Posts: 300
Likes: 0
From: port richey florida
Default

why does this make you in deep trouble. this is just a water pump failure. also hard to turn the steering wheel would be from the belt slipping on the power steering pump since antifreeze is slippery. also yes if the pump isn't moving water through the engine or you have leaked all your fluid out it will start to heat up.
 
Reply
Old Oct 25, 2012 | 03:10 PM
  #4  
corpusfisherman's Avatar
corpusfisherman
Rookie
15 Year Member
Joined: Jun 2010
Posts: 73
Likes: 0
Default

Originally Posted by sl2racer
this is just a water pump failure.
seems to be the issue....I just did mine last month for the first time on my Dak; the hardest part was getting the fan-nut off, LOL....after that, it was all down hill, and actually didn't take that long to do....most of the time is spent scraping the old gasket off....lol

come on Bravocompany! get 'er dun soldier!
jay
 
Reply
Old Nov 8, 2012 | 10:25 PM
  #5  
03daktim's Avatar
03daktim
New Member
Joined: Nov 2012
Posts: 16
Likes: 0
Default

your steering could be your steering shaft. just had to do mine.
 
Reply
Old Nov 9, 2012 | 02:24 PM
  #6  
mmguy18's Avatar
mmguy18
Veteran
Joined: Nov 2011
Posts: 427
Likes: 0
From: St Clairsville Oh
Default

Water pump will have a sip hole on top if pump goes bad it will leak there.
 
Reply
Old Nov 13, 2012 | 07:36 PM
  #7  
metaliox's Avatar
metaliox
Registered User
Joined: Jun 2012
Posts: 10
Likes: 0
Default

IDK guys. I had the same symptoms in my 02 4.7 and it ended up being a blown headgasket. Blew the cap right off shooting coolant all over the engine bay/windshield. Overheating, poor performance, horrible fuel mileage, rough idle, etc. God this motor is unreliable.
 
Reply
Old Dec 7, 2012 | 11:25 PM
  #8  
joejen1's Avatar
joejen1
Registered User
Joined: Dec 2012
Posts: 2
Likes: 0
Default

truck wont start and got a code no bus PLEASE HELP!!!!
 
Reply
Old Dec 7, 2012 | 11:27 PM
  #9  
joejen1's Avatar
joejen1
Registered User
Joined: Dec 2012
Posts: 2
Likes: 0
Default

Help got a no bus code an truck wont start on gages wair it has p r n d 2 1 it keeps scrollen threw them please help!!!!
 
Reply
Old Dec 8, 2012 | 12:09 AM
  #10  
sl2racer's Avatar
sl2racer
Veteran
Joined: Aug 2009
Posts: 300
Likes: 0
From: port richey florida
Default

just a guess but sounds like one of your computers is bad.
 
Reply



All times are GMT -4. The time now is 08:06 AM.