I want to put an electric fan in my 98 Dakota with the 4 cyl. but would like to retain the original wiring just in case. Does anyone know where a female end could be located on these trucks? Is the fog light plug the same configuration?
Thanks guys

 

What happened to the original one from the old setup?

 

rockauto.com look under this

2001 DODGE DAKOTA 2.5L L4 OHV : Electrical-Connector : Radiator Fan Motor

 

Its built into the motor. I got an aluminum shroud and 14 inch fan for a back up when the original decides to give up. Wife is gone this weekend so I will go to the local pick and pull. IMG_18121.jpg

 

so any Dodge fan connector should be the same?

 

I thought the original fan had died if so just cut off the connector and splice onto the new fan.

You will never find those old style fans motors anymore I have seen them a year ago but at $350 dealer only you are better off not just go to the new style as you can find aftermarket ones at $90 or lower.

 

The bearing started to get a little noisey so my wife freaked. LOL I took it off and put some of that new style WD-40 on it and it got quite. So its back on there. And my JY hunt only showed four pin connectors. Thanks for that link but 30 dollars is a little steep. When it comes down to it I will just end up cutting the OEM connector off at that time.
I got the shroud and fan from ebay for 70 bucks. And then notched it to use the original hardware.
And did I thank you for your help? Your truck looks super nice. Air box cover made me chuckle