Video: Changing Transmission Lubricant
#1
#2
#3
Next time I'll probably just get one of those little syringes.
#4
On an AX-15 Before you drain any oil I would check your fill plug first they tend to be super hard to remove very thin plug so getting a socket or anything on that thin fill plug is a Pain in the @ss.
That's why you resort to taking off the shifter to fill the trans up because getting the fill plug off may not work then you are stuck with an empty transmission no oil.
The problem I finally figure out is they used a soft aluminum washer on the fill plug and aluminum is notoriously sticky find a replacement washer that's steel or brass or no washer at all then next time it will come off easy.
I looked everywhere online for a bigger head fill plug and you cant fined any they all have very thin heads.
Every wrench, socket or tool tends to slip off that F-ing plug like butter and the head gets mangled up bad.
I now have a nice new plug that I only lightly tightened up as its thin like the OEM plug what a PAIN.
That's why you resort to taking off the shifter to fill the trans up because getting the fill plug off may not work then you are stuck with an empty transmission no oil.
The problem I finally figure out is they used a soft aluminum washer on the fill plug and aluminum is notoriously sticky find a replacement washer that's steel or brass or no washer at all then next time it will come off easy.
I looked everywhere online for a bigger head fill plug and you cant fined any they all have very thin heads.
Every wrench, socket or tool tends to slip off that F-ing plug like butter and the head gets mangled up bad.
I now have a nice new plug that I only lightly tightened up as its thin like the OEM plug what a PAIN.