DodgeForum.com

DodgeForum.com (https://dodgeforum.com/forum/)
-   2nd Gen Dakota Tech (https://dodgeforum.com/forum/2nd-gen-dakota-tech-67/)
-   -   97 318 5.2 spitt sputter backfire died help (https://dodgeforum.com/forum/2nd-gen-dakota-tech/380863-97-318-5-2-spitt-sputter-backfire-died-help.html)

nde4ever 10-25-2014 01:28 PM

97 318 5.2 spitt sputter backfire died help
 
I have a 97 dodge Dakota sport 4x4 with the 318 I was driving home from work the truck felt like the engine missed then began to spit and sputter and back fire till it finally died

00DakDan 10-25-2014 03:49 PM

Welcome to the forum ride4ever.

Is the CEL on?

Check the fuel pressure. You can rent/borrow a gauge at some auto parts stores.

nde4ever 12-03-2014 06:27 PM

ive done everything no check engine light still back firing
 
I did the manual dodge check engine it brought up codes 24 and 25 the tps and the aic valve they are both new they were both installed correctly and the full tune up plugs wire cap rotor new crank sensor new pick up sensor in the distributer im still backfiring its driving me mad crazy

00DakDan 12-03-2014 06:51 PM

Bad gas? Did you check the fuel pressure?

moe7404 12-05-2014 07:38 PM

my pappy all was said check the easiest and cheapest thing first. in this case i would check the dist cap rotor wires, plugs.

98DAKAZ 12-06-2014 02:51 AM

Glad to know you’re still with us Moe

moe7404 12-06-2014 04:05 PM

yep still around. have had family trouble. my son killed himself. on sept 10. while i was moving in to my moms home. she has Alzheimer's and iam having to take care of her. but some very good friends have helped me a lot. for got to add this. Mopar dist cap wiring
My dad made this saying about chrysler V8 small and big block dist cap wireing. To reduce wiring confuseion. “the small block has the dist in the wrong place, in the back of the engine. BUT the shaft rotates the right way clockwise. The big block has the dist in the right place, in the front of the engine BUT the shaft rotates the wrong direction counterclockwise. Both wire #5 and #7 on both ALL ways have #5 before #7 on the cap AND block. And most / some stock V8s have the fireing order cast in to the intake manifold. And if the cap has a vent hole DO plug the hole. JB-weld works good for that


All times are GMT -4. The time now is 06:53 PM.


© 2024 MH Sub I, LLC dba Internet Brands