2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

missfire

Thread Tools
 
Search this Thread
 
Old Nov 22, 2014 | 08:30 AM
  #1  
finegan86's Avatar
finegan86
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 4
Likes: 0
Default missfire

I have a 98 dodge dakota 3.9L. It would not pass e check because of hot exhaust so a buddy of mine told me to put a bottle of rubbing alcohol in it so I did and it passed now it runs like crap. It had a misfire cylinder 5 so I switched the injectors with 5 and 3. Then the misfire jumped to 3 so I replaced the injector with a new one and it still does it. But it only misfire when it's cold if I let it run for about 15 min it's fine. I'm lost anyone help?
 
Reply
Old Nov 22, 2014 | 10:08 AM
  #2  
magnethead's Avatar
magnethead
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

the ethanol/alcohol family is a safe fuel and should not hurt anything. With that said, the family is highly corrosive, which is why so many vehicles can run E85- it literally will eat anything it touches. But a quart of rubbing alky in a 16 gallon tank shouldn't have even affected the emissions????
 
Reply
Old Nov 22, 2014 | 12:07 PM
  #3  
finegan86's Avatar
finegan86
Thread Starter
|
Registered User
Joined: Nov 2014
Posts: 4
Likes: 0
Default

Idk it just started doin thing after I used it. I'm not sure where to go from here
 
Reply




All times are GMT -4. The time now is 06:20 PM.