2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

03 durango pw work intermittently

Thread Tools
 
Search this Thread
 
Old Jan 24, 2017 | 08:34 PM
  #1  
MC_Dodge's Avatar
MC_Dodge
Thread Starter
|
Registered User
Joined: Jan 2017
Posts: 1
Likes: 0
Default 03 durango pw work intermittently

03 durango, all the power windows except for the drivers have basically stopped working. the problem grandually got worse - i'd roll the windows down, and sometimes they wouldn't roll up; then over time, most of the time they would not roll up. now i'm afraid to roll any of them down. when they worked, they worked fine, meaning they weren't slow to roll up.
 
Reply
Old Jan 24, 2017 | 11:40 PM
  #2  
TNtech's Avatar
TNtech
Site Moderator-Dodge Tech
Joined: Sep 2010
Posts: 3,724
Likes: 22
From: Nashville, Tennessee
Default

Check the voltage on circuitt Q1, the yellow wire. It's possible you could have a master switch issue also. I wouldn't suspect ground because all 4 use the same path back through the master switch and since your drivers window works fine....





 

Last edited by TNtech; Jan 24, 2017 at 11:44 PM.
Reply
Old Jan 28, 2017 | 10:01 AM
  #3  
patchelect's Avatar
patchelect
Professional
Joined: Jan 2009
Posts: 204
Likes: 1
From: Dalton, MA
Default

Somewhere on this forum I found a method of putting a jumper on the child proof switch on the drivers door. My intermittent, most never, passenger window switch has been working fine ever since. I think it's that point marked "9 Lockout" on the drivers door section of the first part of the diagram shown.
 
Reply




All times are GMT -4. The time now is 10:28 AM.