2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Truck wont drive until it shifts to second gear

Thread Tools
 
Search this Thread
 
  #1  
Old 06-17-2018, 06:52 PM
ShadowKnightX4's Avatar
ShadowKnightX4
ShadowKnightX4 is offline
Registered User
Thread Starter
Join Date: Feb 2017
Location: Woodland Park, CO
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default Truck wont drive until it shifts to second gear

I have a 1998 Dodge Dakota, 3.9L V6 SLT with an automatic transmission. I have had several problems with it shifting very funky, just recently it wont take off in first, and then shifts to second very hard. At first everything I've been reccomended was to clean/replace the IAC Valve, so I did just that, but my truck still manages to have the same symptoms, and will stall when i put it into reverse, sit at idle in drive, or will sputter down to low RPMS or even stall when i slow down. I was just suggested that it might be the Torque Converter going out. any help and/or suggestions would be much appreciated
 
  #2  
Old 06-18-2018, 12:39 AM
dakootie's Avatar
dakootie
dakootie is offline
Rookie
Join Date: Apr 2018
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Default

Diagnostics and testing procedures for the RE transmissions start on page 1,784, this is the full 2001 Dodge Ram shop manual.

https://redirect.viglink.com/?format...srvcmanual.zip
 



Quick Reply: Truck wont drive until it shifts to second gear



All times are GMT -4. The time now is 07:48 AM.