2002 Dodge Dakota Front Transfer Case yoke
I bought my Dakota last year and have been fixing the issues it has. One of them is the front transfer case yoke. Apparently the front yoke was torn in half. Where do I find a replacement for this thing? I have looked all over online and haven't found anything! It's a 2002 Dodge Dakota Sport 3.9L. I have attached a picture of the yoke I need. The only part I can find looks nothing like the one I need. Any help on this issue would be greatly appreciated.
Thank you
Thank you
That's going to be a CV shaft companion flange, not a yoke. You should have a Chrysler Corporate 8" IFS Front Axle with a 27 spline pinion. Most aftermarket driveshafts replace it with a 1310 yoke.
Let me see if I can find a PN in my books. The internet comes up with 52105400AA but I don't know if that's front or rear pinion companion flange.
Let me see if I can find a PN in my books. The internet comes up with 52105400AA but I don't know if that's front or rear pinion companion flange.
Last edited by magnethead; Oct 17, 2019 at 10:42 PM.
OK, I found it in my parts book.
The transfercase compound CV joint (both flanges and the CV itself) is item #6, PN 05015109AA
The front pinion driveshaft adapter flange is item #8, and has two numbers: 04882793 and v8012793AA.
The front pinion companion flange is item #2, PN is 52105400AA
The transfercase compound CV joint (both flanges and the CV itself) is item #6, PN 05015109AA
The front pinion driveshaft adapter flange is item #8, and has two numbers: 04882793 and v8012793AA.
The front pinion companion flange is item #2, PN is 52105400AA






