Chasing down the no bus pin 2 on ecm not getting 12v
Thread Starter
|
Registered User
Joined: Aug 2020
Posts: 1
Likes: 0
Chasing down the no bus pin 2 on ecm not getting 12v
I've seen tons of people with this issue but can't find any info on if the ecm /pcm pin 2 doesn't have 12v everyone I've read 2 and 22 have power. What should I look at if pin 2 on the right side connector isn't getting 12v. I believe that one goes to the ignition. Is it that or pcm