2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Egr Vacuum lines to Cpv

Thread Tools
 
Search this Thread
 
Old May 10, 2025 | 09:26 PM
  #1  
Andy89's Avatar
Andy89
Thread Starter
|
Registered User
Joined: May 2025
Posts: 12
Likes: 0
Default Egr Vacuum lines to Cpv

I drive a 92 3.9 4wd. I have been going nuts trying to find any info on which order these two little lines plug into the cpv. They were broken when I bought the truck, and I could only guess at this one here:

If anyone knows or could show me a pic of theirs so i can compare, I'd be forever grateful. Just need to know if the line at the T-joint goes into the top port under the connection or the one below it.
 
Reply
Old May 13, 2025 | 07:49 PM
  #2  
wheily's Avatar
wheily
Professional
5 Year Member
Joined: Jul 2018
Posts: 193
Likes: 9
From: oregon
Default

i checked the one i have here and the elbow on end is just a small filtered vent and the 2 lines are the middle 2 ports
 
Reply
Old May 15, 2025 | 10:27 AM
  #3  
Andy89's Avatar
Andy89
Thread Starter
|
Registered User
Joined: May 2025
Posts: 12
Likes: 0
Default

Originally Posted by wheily
i checked the one i have here and the elbow on end is just a small filtered vent and the 2 lines are the middle 2 ports
Thanks a ton! Finally got the lines fixed with your advice lol.
 
Reply




All times are GMT -4. The time now is 05:52 AM.