2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Let the mods begin....

Thread Tools
 
Search this Thread
 
Old Mar 20, 2006 | 01:50 AM
  #1  
Brett K's Avatar
Brett K
Thread Starter
Joined: Feb 2006
Posts: 12
Likes: 0
Default Let the mods begin....

I just bought my 04 Dakota Quad with the 4.7 last Wednesday. I just got done ordering some MOPAR splash guards, a Gibson Extreme dual exhaust, and a Volant cold air intake. Hopefully, it will get me a little more throttle response and alot better sound.

Other than a thorough detailing and a few minor cosmetics, this will have to hold me over for a while so I can save up for a 7'2" Blizzard or Western snowplow.
 
Reply
Old Mar 24, 2006 | 12:38 AM
  #2  
Dick Manley's Avatar
Dick Manley
Rookie
Joined: Feb 2006
Posts: 63
Likes: 0
From:
Default RE: Let the mods begin....

lift it
 
Reply
Old Mar 26, 2006 | 01:54 AM
  #3  
Brett K's Avatar
Brett K
Thread Starter
Joined: Feb 2006
Posts: 12
Likes: 0
Default RE: Let the mods begin....

I will probably level the front end an inch by cranking the tbars but that is about it. The truck will be used for hauling and plowing and probably won't see any off roading other than hunting and fishing. It is too easy to tell when it has been lifted. My wife would figure out why my wallet is always empty.
 
Reply
Old Mar 26, 2006 | 03:39 AM
  #4  
horatio102's Avatar
horatio102
Champion
Joined: Feb 2005
Posts: 3,710
Likes: 2
From: Skagit County, WA
Default RE: Let the mods begin....

Just be aware that if you level it empty and then throw a load in it (or hook up a trailer) your headlights will be lighting up the sky.
 
Reply
Old Mar 27, 2006 | 01:23 AM
  #5  
Brett K's Avatar
Brett K
Thread Starter
Joined: Feb 2006
Posts: 12
Likes: 0
Default RE: Let the mods begin....

I will probably only raise it an inch which will still leave the back slightly taller and then I'll add Timbrens for the front and rear.
 
Reply




All times are GMT -4. The time now is 01:51 PM.