2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Question on Dakota/Ram Pillers...

Thread Tools
 
Search this Thread
 
Old Dec 25, 2006 | 02:25 AM
  #1  
User's Avatar
User
Thread Starter
|
Champion
Joined: Aug 2006
Posts: 3,051
Likes: 6
From: Roanoke, Texas
Default Question on Dakota/Ram Pillers...

Does the piller on the driver side with the oh **** handle on it change in each vehicle? Like does the Dakota and Dodge Ram have the same type of pillers, im looking to putting guages in my truck with a pod and i need to know...

Could i get by using a dodge ram piller in my dakota?

btw i have a 2000 Dakota...

 
Reply
Old Dec 26, 2006 | 03:28 AM
  #2  
jonnymagnum's Avatar
jonnymagnum
Grand Champion
Joined: Sep 2005
Posts: 6,645
Likes: 3
From: ontario, canada
Default RE: Question on Dakota/Ram Pillers...

I dont think they will fit.

are you looking to custom make one or buy one?
 
Reply
Old Dec 26, 2006 | 04:39 PM
  #3  
User's Avatar
User
Thread Starter
|
Champion
Joined: Aug 2006
Posts: 3,051
Likes: 6
From: Roanoke, Texas
Default RE: Question on Dakota/Ram Pillers...

ORIGINAL: jonnymagnum

I dont think they will fit.

are you looking to custom make one or buy one?
na they just have a deal with glowshift if you buy the ram piller you get 4 gauges and you save like 80 dollars, i might ebail them and see if they will through in a dakota piller for the ram piller.
 
Reply
Old Dec 31, 2006 | 04:40 AM
  #4  
BlueDak's Avatar
BlueDak
Rookie
Joined: Feb 2005
Posts: 77
Likes: 0
From:
Default RE: Question on Dakota/Ram Pillers...

they do not interchange, search the web, there are several sources for these pods. I have single that I have not installed yet, but I know there is a triple available also. If you go to my picture poster, you will see the custom pod I made for under my dash using a dual guage pod from a Mustang.
 
Reply




All times are GMT -4. The time now is 10:28 AM.