I saw some spark plugs called E3, anybody have any comment on them or have any suggestions. Where are the bolts to level my front end, any pics.

 

They are a vendor on this iste, but I would stick with the OEM Champion copper or iridium. You can twist your torsion bars to level the front end (1/4" per twist),
FF

 

stick with oem style..and the bolts are on the "keys".. if you follow your torsion bar to the end. you'll see a cross member and on the end of the torsion you'll see the key and bolt.. the picture isnt the best but it gives you an idea.... the bolt goes into that half moon lock he is holding

--also you should lift the front of the vehicle off the ground when you do this--also should get an alignment too

 

Any chance of a DIY write up on this?

"You can twist your torsion bars to level the front end (1/4" per twist)," <--- is a 'twist' one full rotation?