Rear park assist not beeping
Thread Starter
|
Registered User
Joined: Aug 2013
Posts: 1
Likes: 0
Rear park assist not beeping
2007 Durango, 4.7L engine 4x4. The rear park assist LED's are working but I am not getting the audio beeps. The only control I can find for the rear park assist is in the VIC and its either on or off. Need help. Thanks.
Record Breaker
Joined: Jul 2012
Posts: 1,084
Likes: 4
Dnload,
The only way to program the feature as you mentioned is through the EVIC.
The detection distance range from the rear of the vehicle is about 0.3 meters (11.8 inches) to about 2.0 meters (80 inches), and the detection height range from the ground is about 0.2 meters (7.8 inches) to about 0.8 meters (31 inches). The detection area extends somewhat around both rear sides (corners) of the vehicle. Therefore if there is an object within these ranges and the rear bumper is free of dirt and debris and you are still not hearing the audible signal, you may want to have the vehicle diagnosed by a Dodge dealer.
If you have any questions please feel free to ask and I'd be happy to help.
The only way to program the feature as you mentioned is through the EVIC.
The detection distance range from the rear of the vehicle is about 0.3 meters (11.8 inches) to about 2.0 meters (80 inches), and the detection height range from the ground is about 0.2 meters (7.8 inches) to about 0.8 meters (31 inches). The detection area extends somewhat around both rear sides (corners) of the vehicle. Therefore if there is an object within these ranges and the rear bumper is free of dirt and debris and you are still not hearing the audible signal, you may want to have the vehicle diagnosed by a Dodge dealer.
If you have any questions please feel free to ask and I'd be happy to help.