Srt4 body parts for 01 NEON?
#3
RE: Srt4 body parts for 01 NEON?
i know everything will fit but for the front and rear bumpers you need the 03 or higher year taillights and for the front bumper you need the 03-05 washer fluid reservoir the hood will fit could be a chance that there is a lip of one inch but after you put the grill on it everything will fit hope you understand it how i wrote it little bit in a hurry
#7
RE: Srt4 body parts for 01 NEON?
For 00-02 models you need the following
-Srt front bumper
-srt rear bumper
-03-05 headlights from an sxt or srt
-03-05 tail lights from an sxt or srt
Opt.
-03-05 foglights also with the wiring. The 03-05 fogs have different wiring, so you have to change the pigtails to use the new style connector
-srt exhaust or custom exhaust*
(you can use an R/T) exhaust by either expanding the cutouts, modifying your R/T exhaust pipes to be approx. two inches further apart or rolling your bumper.
You will also optionally need these
Srt spoiler
srt washer bottle
(you can optionally drain your stock bottle and put a hair dryer to it. Once its warm simply push in the front of it a few inches in to give clearance for the passenger side foglight. If your car has no fogs then dont worry about it.)
-srt side skirts
-srt door caps
For 03-05 models you need the following
-Srt front bumper
-srt rear bumper
-srt exhaust or custom exhaust*
(you can use an R/T) exhaust by either expanding the cutouts, modifying your R/T exhaust pipes to be approx. two inches further apart or rolling your bumper.
You will also optionally need these
Srt spoiler
srt washer bottle
(you can optionally drain your stock bottle and put a hair dryer to it. Once its warm simply push in the front of it a few inches in to give clearance for the passenger side foglight. If your car has no fogs then dont worry about it.)
-srt side skirts
-srt door caps
-Srt front bumper
-srt rear bumper
-03-05 headlights from an sxt or srt
-03-05 tail lights from an sxt or srt
Opt.
-03-05 foglights also with the wiring. The 03-05 fogs have different wiring, so you have to change the pigtails to use the new style connector
-srt exhaust or custom exhaust*
(you can use an R/T) exhaust by either expanding the cutouts, modifying your R/T exhaust pipes to be approx. two inches further apart or rolling your bumper.
You will also optionally need these
Srt spoiler
srt washer bottle
(you can optionally drain your stock bottle and put a hair dryer to it. Once its warm simply push in the front of it a few inches in to give clearance for the passenger side foglight. If your car has no fogs then dont worry about it.)
-srt side skirts
-srt door caps
For 03-05 models you need the following
-Srt front bumper
-srt rear bumper
-srt exhaust or custom exhaust*
(you can use an R/T) exhaust by either expanding the cutouts, modifying your R/T exhaust pipes to be approx. two inches further apart or rolling your bumper.
You will also optionally need these
Srt spoiler
srt washer bottle
(you can optionally drain your stock bottle and put a hair dryer to it. Once its warm simply push in the front of it a few inches in to give clearance for the passenger side foglight. If your car has no fogs then dont worry about it.)
-srt side skirts
-srt door caps