SRT Bottom Door Trim
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I'll make this quick and painless.
I need the bottom door trim for my neon(Non-SRT obviously) to match better with my body-kit(tiny gap between kit and car when doors closed)The same side skirts as Kracks car on 2GN, even his has the gap but it's ugly and I don't like it. I can't find a dealer online, and I'm sure a local dealer would charge 2 arms and 17 legs for a set of these.
BTW, those problems I had with the kit not fitting, I decided to rip the damn thing off, chip off all the damn bondo I used and starting from scratch. The holes are filled with epoxy now, the skirts are cut right so they will fit now, And tommorow I'll be painting them and screwing them on(2-sided tape up here in canada would mean one quick fiberglass dissaster going down the highway in wintertime). Pics tommorow night.
I need the bottom door trim for my neon(Non-SRT obviously) to match better with my body-kit(tiny gap between kit and car when doors closed)The same side skirts as Kracks car on 2GN, even his has the gap but it's ugly and I don't like it. I can't find a dealer online, and I'm sure a local dealer would charge 2 arms and 17 legs for a set of these.
BTW, those problems I had with the kit not fitting, I decided to rip the damn thing off, chip off all the damn bondo I used and starting from scratch. The holes are filled with epoxy now, the skirts are cut right so they will fit now, And tommorow I'll be painting them and screwing them on(2-sided tape up here in canada would mean one quick fiberglass dissaster going down the highway in wintertime). Pics tommorow night.
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
He's talking about side skirts. the regular MOPAR kits that everyone talks about here go all the way accross the bottom, under the doors... but I beleive the SRT or other versions, have a separate piece that actually mounts at the bottom of the door (rear door, I think)
possible like this? (look at the bottom of the rear door that's open?)
possible like this? (look at the bottom of the rear door that's open?)
![](http://www.wideopenwest.com/~whitedragon/silver-neon-bodykit.jpg)
#6
#7
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
He's talking about side skirts. the regular MOPAR kits that everyone talks about here go all the way accross the bottom, under the doors... but I beleive the SRT or other versions, have a separate piece that actually mounts at the bottom of the door (rear door, I think)
possible like this? (look at the bottom of the rear door that's open?)
![](http://www.wideopenwest.com/~whitedragon/silver-neon-bodykit.jpg)
possible like this? (look at the bottom of the rear door that's open?)
![](http://www.wideopenwest.com/~whitedragon/silver-neon-bodykit.jpg)
Oh, and I have that exact same FRONT bumper, but I cut out the middle peice and fiberglassed it flush. It looks better IMO and flows with the hoodline alot better. I'm not trying to make it look like an SRT, and that middle peice has SRT written all over it.
Trending Topics
#9