2nd Gen Neon 2000 - 2005 2nd Gen Neon

engine trouble

Thread Tools
 
Search this Thread
 
Old Jun 25, 2013 | 10:41 PM
  #1  
xarkhun's Avatar
xarkhun
Thread Starter
|
Rookie
Joined: Jun 2011
Posts: 82
Likes: 0
From: forest grove OR
Default engine trouble

i was driving down the highway and my engine started bogging real bad when i used the accelerator so when i got pulled over i checked the codes to see if any new had popped up because my CEL has been on for awhile for a small leak detected in the evap system. any who the new codes are p0016,p0068,p0342,and p0340 i looked them up and three of the four codes are for the CPS and the other is for the MAP can these codes be triggered from a blown head gasket or would different codes come up?
 

Last edited by xarkhun; Jun 26, 2013 at 07:31 PM.
Reply
Old Jun 26, 2013 | 08:30 PM
  #2  
xarkhun's Avatar
xarkhun
Thread Starter
|
Rookie
Joined: Jun 2011
Posts: 82
Likes: 0
From: forest grove OR
Default

i checked the oil and the coolant and nether have mixed and also pulled the plugs and plug 1 had oil on the threads plug 2 was dirty but not oily the rest where clean and on further inspection i found fuel in my intake manifold. what causes fuel to get into the intake manifold
 

Last edited by xarkhun; Jun 27, 2013 at 01:45 AM.
Reply




All times are GMT -4. The time now is 06:17 PM.