2nd Gen Neon 2000 - 2005 2nd Gen Neon

01 Compressor High Pressure Switch

Thread Tools
 
Search this Thread
 
  #1  
Old 03-18-2019, 11:44 AM
dtgamer99's Avatar
dtgamer99
dtgamer99 is offline
Registered User
Thread Starter
Join Date: Mar 2019
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default 01 Compressor High Pressure Switch

Hello,

I recently installed a refurbished a/c compressor on my 01 dodge neon. The replacement compressor did not have the green high pressure cut off switch on the side like my old one does now. I didn't know you could buy the switch and install it. The replacement compressor is now installed and the system is charged but I did not install the switch. I bypassed the switch to recharge the system. I know it sounds silly because the switch is activated by pressure and now the system is under pressure but you never know so I have to ask...

The question is, am I able to install the high pressure cut off switch on the side without purging the system?

**I just read on another site how this guy had this very switch explode out from over pressure. He pulled out the remaining bits and installed another switch. I'm guessing the hole where the switch goes is exposed and would require the system to be drained. I was hoping to avoid this but I should be fine.
 

Last edited by dtgamer99; 03-18-2019 at 02:12 PM.



Quick Reply: 01 Compressor High Pressure Switch



All times are GMT -4. The time now is 05:00 AM.