Ordered a snap on mt2500 scanner from ebay! It comes with a bunch of stuff. I hope it isn't missing anything for my truck. Now I can get that dang fuel sync set and mess with my iac.

 

Hey guys, sorry I'm not sure what problem you guys are talking about and there's too many pages in this thread for my lazy a&$ to look through but I have a cam with about the same lift, little more duration and a tighter lsa (110). The only problem I had is when coming off of a high rev or letting of the gas at a stoplight the engine would almost always want to idle real low or more often stall. If your having idle or stalling issues like this PM me and I'll let you know what I did to fix mine. Good luck.

 

what not just make a thread about it in the general discussion section?!

 

Just one time not using the trip meter with the 99 showing a quarter of a tank and fill at the pump went to 31.5 gallons. Note, most Rams have 8 gallons at a quarter of a tank. Advice, always use the trip meter at each fill, never trust a Ram fuel gauge. K.

Edit, fuel light on a 34 gallon diesel tank is 6-8 gallons (1/8 to just shy a 1/4). The VP44 pump is cooled by the fuel. The more fuel, better pump cooling (I've always heard). Factor of recirculation.

 

ordered my gas tank straps yesterday. they will be in tomorrow morning. my buddy and i will be tackling the straps, then putting diesel coils, shocks in the front, and a 2" aal and load leveling shocks in the rear of his truck after mine is done!

 

Went out and removed the old straps tonight..

Front strap (broke last fall)



Rear strap literally fell apart as soon as I unbolted it!

 

^That's scary! And is your pm box full? Not sure if you got my message.

 

just pmed you back! didnt realized i had a pm lol

 

Put some gas in it and drove to D.C. (yesterday)

 

installed new gas tank straps today. only took about 5 minutes, literally!

also installed diesel coils, rancho shocks, and sway end links on my buddys truck!

i started making the "brackets" for my third gen bumper today.