The Official 2nd Gen RAM Forum OT thread
#1941
So, I was looking at ordering parts/tuning for my 2005 Subaru STi and I was looking through P&L Motoracing's video's, these guys are the main tuner for Subarus for Ohio, we drive to IL for it.
Anyways.. look what I found!!
http://www.youtube.com/watch?v=dKkGwG9V-5k
Anyways.. look what I found!!
http://www.youtube.com/watch?v=dKkGwG9V-5k
#1942
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
That 125 should do up to 1/4 " nicely.
This is the thread I started for when I got my welder. It has pictures of the pressure washer cart that I converted into a welding cart and my practice welds on there. You'll see how the difference between flux core wire and solid wire is pretty drastic.
https://dodgeforum.com/forum/off-top...ch-welder.html
#1944
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
The Pro Mig 180 comes with a hose and regulator.
I'm just sayin...
Oh, I also dropped 200$ on all the wire and boxes and stuff needed to properly run a 240v outlet from the breaker box to the end of the house where I do my welding and to make a heavy duty 30' extension cord.
I bought too much wire though, so I could have saved some money but I don't think your can return unused wire.
I'm just sayin...
Oh, I also dropped 200$ on all the wire and boxes and stuff needed to properly run a 240v outlet from the breaker box to the end of the house where I do my welding and to make a heavy duty 30' extension cord.
I bought too much wire though, so I could have saved some money but I don't think your can return unused wire.
Last edited by Sheriff420; 09-03-2010 at 12:02 PM.
#1946
How many VW owners did you **** off with that load??
srsly though, where the HELL do you get all this vw/ghia stuff? Is this all stuff you had layin around? I'm a bit of a packrat myself but dayum lol
srsly though, where the HELL do you get all this vw/ghia stuff? Is this all stuff you had layin around? I'm a bit of a packrat myself but dayum lol
#1947
Unknown. Click here to see my post and then follow the thread. Since it's a long weekend, it may be a while before some people post.
The two Super Beetle (the rather complete car and shell) came from a friend. We were going to do a body swap until he discovered the complete car was more rusted than he thought. He wanted to keep it because it has an original sunroof. I told him to scrap it all because he has two project cars in his barn, two more in the garage, a Karmann Ghia waiting in the wings, two Busses, and another Super that he needs to dump. Inside the complete car was the remnants of a 1969 from my collection, and then that early clip. I've collected a lot of stuff over the years to keep original parts in circulation; however, my priorities in life have changed, and since I don't have the time or inclination to try and salvage everything to try and sell, it's just easier and more convenient to scrap it all
srsly though, where the HELL do you get all this vw/ghia stuff? Is this all stuff you had layin around? I'm a bit of a packrat myself but dayum lol
#1948
Join Date: Apr 2008
Location: Lee County, North Carolina
Posts: 7,055
Likes: 0
Received 5 Likes
on
5 Posts
I've collected a lot of stuff over the years to keep original parts in circulation; however, my priorities in life have changed, and since I don't have the time or inclination to try and salvage everything to try and sell, it's just easier and more convenient to scrap it all
#1950
How about some updated pictures of the challenger build? Bet you guys forgot about that bad boy.
Engine being built:
Coil Pack covers:
Motor fitted to the car:
Turbos:
The video below IS NOT the same challenger! It is owned by another guy who is getting basically the same build as Jim is, but without all the dress up items. Note that when Steve says low boost, he means around 3PSI on a motor capable of handling over 30 pounds.
http://www.youtube.com/watch?v=fYutW...feature=autofb
Engine being built:
Coil Pack covers:
Motor fitted to the car:
Turbos:
The video below IS NOT the same challenger! It is owned by another guy who is getting basically the same build as Jim is, but without all the dress up items. Note that when Steve says low boost, he means around 3PSI on a motor capable of handling over 30 pounds.
http://www.youtube.com/watch?v=fYutW...feature=autofb