What have you replaced since you've owned your RAM?
#11
I bought mine in early Jan. and ive replaced-
timing chain/gears
throttle postion sen
crank pos. sen.
brakes all around
radio
power window motor/switch driver side
air filter(upgrade)
plugs
dist cap/rotor/the sensor (cant remember the name..)
oil(to synthetic)
all lights upgraded (front,rear,third)
and just today..the TB gasket
*Plan on changing trans and differ fluids/gaskets sometime later
WOW didnt realize ive done that much..
timing chain/gears
throttle postion sen
crank pos. sen.
brakes all around
radio
power window motor/switch driver side
air filter(upgrade)
plugs
dist cap/rotor/the sensor (cant remember the name..)
oil(to synthetic)
all lights upgraded (front,rear,third)
and just today..the TB gasket
*Plan on changing trans and differ fluids/gaskets sometime later
WOW didnt realize ive done that much..
#12
Since I bought it in April:
Battery
TPS
Tires
Vacuum check valve
Air filter (upgrade to FIPK)
Headlight lamps (after restoring lenses, of course)
Transmission (which led to t-case vacuum lines and TV cable)
Transfer case fluid (added a Transfer Case Saver)
Coil, distributor cap, rotor, coil/spark plug wires, spark plugs
Oil, filter
I might have forgotten a few things. Something that's not a replacement but has already paid for itself many times over is the anti-theft tailgate lock which has already prevented one attempted tailgate theft.
Battery
TPS
Tires
Vacuum check valve
Air filter (upgrade to FIPK)
Headlight lamps (after restoring lenses, of course)
Transmission (which led to t-case vacuum lines and TV cable)
Transfer case fluid (added a Transfer Case Saver)
Coil, distributor cap, rotor, coil/spark plug wires, spark plugs
Oil, filter
I might have forgotten a few things. Something that's not a replacement but has already paid for itself many times over is the anti-theft tailgate lock which has already prevented one attempted tailgate theft.
#14
#15
https://dodgeforum.com/forum/2nd-gen...ced-since.html um yeah we did this about a year ago ...
#18
#19
#20
haha, should we add what needs to be done?
i NEED this done
-Timing Chain/gears
-Drop pitman arm (have part just havent installed)
-Track bar
-couple brake lines near MC.
-Front Springs/Rear leaf springs (sags 1 3/4 in on drivers side...putting deisel springs in)
-fuel guage (need it working again, its stuck on full)
-Harmonic Balancer
-Alignment
-Axle seal is leaking AGAIN....
-Muffler (exhaust ends after CAT)
-Cat Convertor (or hollow it...shes starting to rattle)
-02 sensors
-Put a new EGR pipe in (have part, just cant get old one off the exhaust manifold)
-T-case Saver
i NEED this done
-Timing Chain/gears
-Drop pitman arm (have part just havent installed)
-Track bar
-couple brake lines near MC.
-Front Springs/Rear leaf springs (sags 1 3/4 in on drivers side...putting deisel springs in)
-fuel guage (need it working again, its stuck on full)
-Harmonic Balancer
-Alignment
-Axle seal is leaking AGAIN....
-Muffler (exhaust ends after CAT)
-Cat Convertor (or hollow it...shes starting to rattle)
-02 sensors
-Put a new EGR pipe in (have part, just cant get old one off the exhaust manifold)
-T-case Saver
Last edited by 95RAM360; 12-10-2010 at 09:49 AM.