They are still in one piece.....not much to go wrong with them, ride doesnt change one bit, turning radius is still good, only thing I noticed was that my sway bar and a tie-rod end just rub(that could be due to the lift springs and spindles together), and the sway bar ends have a mark from the spindles tapping them. Neither of these are that big of a problem and if it wasnt for me sliding sideways the sway bar would be ditched.

What you trying to get from the picture...just asking so i know what to focus on

 

The sway bar does nothing on these trucks. My Integra has a beefier sway bar.

 

Just curious of how it looks with all that free space under the front end. When you say the tie rod end and sway bar endlink rub do you mean only when youve got it turned or all the time? Just curios because I also have lift springs so I may face the same issue.

 

When turned all the way, and if flexed, its no big deal just enough to rub the paint a little, and just an FYI I have 2.5" lift springs

 

Ok sorry it took so long....me and my camera had problems then photobucket had problems so I tried it with my phone and got it to work