2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

Cold Air Intake

Thread Tools
 
Search this Thread
 
Old Jun 22, 2011 | 03:57 PM
  #1  
deerehunter's Avatar
deerehunter
Thread Starter
|
Amateur
Joined: Jun 2011
Posts: 41
Likes: 0
From: Lawrence, Michigan
Default Cold Air Intake

I have been looking to do this for awhile, but i am wondering what brand would be good on a budget. Somewhere around $150 if possible.
 
Reply
Old Jun 22, 2011 | 04:07 PM
  #2  
RamSport97's Avatar
RamSport97
Record Breaker
Joined: Jul 2008
Posts: 1,210
Likes: 0
From: Crystal River, FL
Default

For around $150- Spectre

But you could get a 14x3 old school open element which would do the same thing.
 
Reply
Old Jun 22, 2011 | 04:13 PM
  #3  
Annihilator_X9's Avatar
Annihilator_X9
Captain
Joined: Jul 2010
Posts: 609
Likes: 1
From: Grand Rapids, MI
Default

Originally Posted by RamSport97
For around $150- Spectre

But you could get a 14x3 old school open element which would do the same thing.
^ THIS

I vote 14x3.
 
Reply
Old Jun 22, 2011 | 04:28 PM
  #4  
dodgeram07's Avatar
dodgeram07
Champion
Joined: Mar 2008
Posts: 3,363
Likes: 1
From: ohio
Default

lose the Jet Power Module
 
Reply
Old Jun 22, 2011 | 04:46 PM
  #5  
RamSport97's Avatar
RamSport97
Record Breaker
Joined: Jul 2008
Posts: 1,210
Likes: 0
From: Crystal River, FL
Default

Originally Posted by dodgeram07
lose the Jet Power Module
+1, garbage.
 
Reply
Old Jun 22, 2011 | 06:08 PM
  #6  
deerehunter's Avatar
deerehunter
Thread Starter
|
Amateur
Joined: Jun 2011
Posts: 41
Likes: 0
From: Lawrence, Michigan
Default

I like the jet power module. It did what it said it would do, at least for me anyways. Where can you find the 14x3 at?
 
Reply
Old Jun 22, 2011 | 06:11 PM
  #7  
RamSport97's Avatar
RamSport97
Record Breaker
Joined: Jul 2008
Posts: 1,210
Likes: 0
From: Crystal River, FL
Default

The computer will over ride the JET power module eventually. RM Indy actually recorded a slower ET time with the JET chip installed.

Edelbrock or Holley 14x3 can be found at any Advanced Auto parts or Autozone. Use the search button, there are plenty topics on the 14x3 that will answer your questions. There is also a DIY.
 
Reply
Old Jun 22, 2011 | 06:29 PM
  #8  
deerehunter's Avatar
deerehunter
Thread Starter
|
Amateur
Joined: Jun 2011
Posts: 41
Likes: 0
From: Lawrence, Michigan
Default

Oo. What about the S bolt for the 14x3?
 
Reply
Old Jun 22, 2011 | 08:28 PM
  #9  
RamSport97's Avatar
RamSport97
Record Breaker
Joined: Jul 2008
Posts: 1,210
Likes: 0
From: Crystal River, FL
Default

Originally Posted by deerehunter
Oo. What about the S bolt for the 14x3?
bend one out of 1/4" x 20 all thread or buy one.
 
Reply




All times are GMT -4. The time now is 01:46 AM.