So, after 2 days of thinking and hunting parts, and listening to the diff opinions of people... I've compiled a list of what I plan to spend a chunk of Deployment money on... Bringing my truck back to 100%, then going past it to 120%. Wondering if people have any nightmare scenarios with any of the parts i'm listing...

Using Summit Racing, Rock Auto, Hughes Engines and Crutchfield as websites...


What - Brand/Part number/Website/Price
Cold Air - Spectre/ SPE-9931/ Summit/149.99
Headers - Summit/SUM-G9045/Summit/199.95
Header Bolts - Summit/STG-8915/Summit/44.95 (Stage 8 Locking)
Y-pipe – Catco/CTO-9198/ Summit/305.95
I-pipe – Walker/WLK-52097/Summit/21.00
Muffler – Flow master 40/FLO-942540/Summit/77.00
Tailpipe – Magnaflow/MPE-15034/Summit/52.00
Band Clamps(X3) – Walker/WLK-33240/Summit/24.00
Exhaust Hangar – Pypes/PYE-HVH11S/Summit/13.00
Timing Kit - Comp Cams/CCA-2103/ Summit/44.95 (Double Roller)
Plug Wires - Summit/SUM-867815CR/ Summit/52.90 (Cap & Rotor too)
TB Spacer - Trick Flow/ TFS-61520001/ Summit/ 61.95
1.7 RR - Harland Sharp/CSP-S70037/ Summit/349.95
Intake Manifold bolts – Hughes/HUG 7700/21.00
Plenum Repair kit – Hughes /HUG 7720/119.95
180 Deg. Thermo. – Hughes/HUG 1839/9.95
O2 Sens. (X2) – Hughes/HUG 23151/98.98
F&R Wheel Bearing and Seal Kit – National/RA331/Rock/228.00
Steering U-joints (X2) – precision/P#374/Rock/68.00
Lower RAD Hose – Dayco/P#71714/Rock/11.80
Upper RAD Hose – Dayco/P#71713/Rock/11.23
Water Pump – Cardone/P#5533314/Rock/44.79
Brake Pads – Monroe/P#DX859/Rock/34.79
Brake Shoes -Monroe/P#BX583/Rock/37.99
Brake Drums(X2) - Raybestos/P#9696R/Rock/126.00
Brake Rotors(X2) - Raybestos/P#76920R/Rock/106.00
Drum Brake Hardware - Carlson/P#H7298/Rock/4.56
Throttle Body Gasket – Fel-Pro/P#609581/Rock/0.87
Front Shocks(X2) – Monroe/P#32279/Rock/42.00
Rear Shocks(X2) – Monroe/P#32278/Rock/42.00
Spark Plug(X8) – Champion/P#436/Rock/14.32 (RC12LC4)
Wiper Blades(X2) – ACDelco/P#82201/Rock/14.56
Head Unit – Kenwood/113KDC418/Crutch/79.99 (KDC-418)
Receiver Wire Harness – Crutch/120701817/Crutch/9.99
In-Dash Receiver Kit – Crutch/120306229/Crutch/9.99

Total: $2534.35. Not including Shipping.
(All Fluids and Oil Filter will be bought from Advance Auto when I get home.)

So what do you guys think?

 

I would have the exhaust done at a shop. Will be a lot cheaper. And forget the TB spacer, they do nothing with our style intake manifold. And get the NTK o2 sensors from Rock Auto. Also you can get the plenum plate on ebay(guy on DF makes them)The money you save on both those the TB spacer,plate and the exhaust, get a Fastman TB or the one on ebay(a guy on DF makes them also) and an SCT tuner.

 

Look on amazon as well, free shipping and sometimes cheaper