2nd Gen RAM general discussion/NON-tech This section is for general discussions about your 2nd gen RAM. Non tech related RAM threads belong here.

1995 Dodge Ram 1500 with Hughes Intake

Old Sep 25, 2013 | 09:45 PM
  #1  
Forceofwon's Avatar
Forceofwon
Thread Starter
|
Amateur
Joined: Jun 2011
Posts: 39
Likes: 0
From: Edmond, Oklahoma
Default 1995 Dodge Ram 1500 with Hughes Intake

If anyone remembers me on here-I had alot of problems in the past with this truck, 318 engine and standard tranny. The stock intake manifold was warped AND had the plenum plate problems. I was told to buy a Hughes intake, and sure enough-solved the problem. Truck has been running great. That was in Oklahoma. I moved out to Arizona, and low and behold, emissions inspections, my truck failed all tests. Because there are NO provisions for the EGR valve in the Hughes intake, and I threw out the EGR valve-Im screwed. Its either buy another vehicle or spend lots of $$ having to put everything back to stock. I opted to buy another vehicle.
I will selll this truck as is for $1500. It has shorty headers, Accel super coil, expensive plug wires and of course the Hughes intake. If any of you live in Az, I live in Mesa and you can email me at DarrelRiffle@live.com. Truck also has a fairly new paint job
 
Old Sep 25, 2013 | 10:57 PM
  #2  
getdown78's Avatar
getdown78
Veteran
Joined: Dec 2012
Posts: 468
Likes: 0
From: Colorado
Default

That where you screwed up by moving to a emissions state ! I live in colorado springs,co and they don't do them anymore here but i know my truck would fail !
 
Old Sep 25, 2013 | 10:58 PM
  #3  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,212
Likes: 367
From: Winston Salem, NC
Default

Please post items for sale, including trucks in the appropriate section (classifieds). I am closing this thread but leaving it here so others can see it.
 


Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:37 AM.