i am thinking of installing a body lift on my 99 Ram 1500 and i am wondering if there is anything that i should look out for as in needing to reroute wires, hoses, linkages...? and any pointers would be appricated, thanks guys.

 

depending on the size of the lift you may need to extend brakes steering and fuel lines, and mess with the tranny linkage and transfercase linkage but other than that its easy
[align=left] [/align]

 

i am thinking about a 3in.

 

You shouldn't have a problem with a 3". Mine has that and I did my 97 Jeep Wrangler Sport as well. Everything you need comes in the kit along with routing instructions. Just make sure you lift it correctly because if it slides on you then it's hell getting it back on the frame straight.

 

yea my friend has a three inch and didnt have to extend any thing [align=left] [/align]

 

I installedmine. It was pretty easy, you do have to legnthen the trans linkage by welding it, and the trans shifter but the good kits come with all that stuff. Also need longer fuel filler hoses but mine came with them. Pretty straight foward.