2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

RECON White Lightning

Thread Tools
 
Search this Thread
 
Old Jun 1, 2007 | 11:22 PM
  #1  
capt joe's Avatar
capt joe
Thread Starter
|
Rookie
Joined: Jan 2007
Posts: 58
Likes: 0
From: Galveston, TX
Default RECON White Lightning

Ordered Smoked Recon cab lights and White Lightning light bar after seeing previous post on the cab lights. I'll tackle the cab lights tomorrow.

I installed the White Lightning today. Simple enough hook-up, it plugs into the trailer plug and the backup lights splice into the truck backup lights. The White Lightning has white lights that come on in reverse. It also has the red LEDs for stop, turn, and running. I'm very satisfied with the red LEDs-consistent lighting across the entire length. I'm VERY dissatifed with the white LEDs-they are brightest at the driver side back-up light where they splice in per the directions and then gradually dim along the length of the bar.

What concerns me is that I really like the looks of the Big Rig amber side mounted lights, they look good in the catalog, but so did the White Lightning!Now I'm thinking they may operate the same as the white lights-brightest where they tap in and gradually dim.
Any experiences or thoughts?

Here are some pics,sorry for the poor quality-pic phone, but you get the idea. White lights wouldn't even show up.
 
Reply
Old Jun 2, 2007 | 04:15 PM
  #2  
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 109
From:
Default RE: RECON White Lightning

Don't know about the dimming issue, only heard that the leds will burn out sporatically in the future, which many dislike. My questions is how did you install them over the spare tire crank hole?
 
Reply
Old Jun 2, 2007 | 06:45 PM
  #3  
capt joe's Avatar
capt joe
Thread Starter
|
Rookie
Joined: Jan 2007
Posts: 58
Likes: 0
From: Galveston, TX
Default RE: RECON White Lightning

The plastic is soft enough to use a utility knife or hacksaw to trim the area around the access hole. It's a 90 degree piece of plastic that the LEDs mount to, so it wasn't a problem. Just be careful that if you're using a hacksaw that you don't cut the LEDs!
 
Reply
Old Jun 5, 2007 | 04:46 AM
  #4  
JarheadX's Avatar
JarheadX
All Star
Joined: Mar 2006
Posts: 904
Likes: 0
From:
Default RE: RECON White Lightning

do those lights have to be run in a series and then sent to like a main unit prior to the battery?
 
Reply
Old Jun 5, 2007 | 02:46 PM
  #5  
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 109
From:
Default RE: RECON White Lightning

ORIGINAL: capt joe

The plastic is soft enough to use a utility knife or hacksaw to trim the area around the access hole. It's a 90 degree piece of plastic that the LEDs mount to, so it wasn't a problem. Just be careful that if you're using a hacksaw that you don't cut the LEDs!
Ah, gotcha. Always wondered that.

I would love to know how you end up wiring the black cab lights together and what source they're connected to. Please keep us posted because I want the same black ones on my black truck. The lights are still amber, right?
 
Reply
Old Jun 6, 2007 | 11:33 PM
  #6  
capt joe's Avatar
capt joe
Thread Starter
|
Rookie
Joined: Jan 2007
Posts: 58
Likes: 0
From: Galveston, TX
Default RE: RECON White Lightning

The light bar plugs into the flat, 4 pole trailer connector.

I wired my cab lights just like jnellydodge describes in his post "Installed the smoked Recon lights". I ordered the smoked lights but the lenses look clear to me. The package was marked as being smoked for the 2001 Dodge. I'm not concerned because I am pleased with the turn-out. Looks like "Billy-Big-Rig"! Next plan is the amber running lights that mount below the doors, then air horn, 53 ft reefer trailer, CB radio, naked girl mud flaps...

Yes, the lights are amber.
 
Reply
Old Jun 7, 2007 | 03:28 AM
  #7  
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 109
From:
Default RE: RECON White Lightning


ORIGINAL: capt joe

The light bar plugs into the flat, 4 pole trailer connector.

I wired my cab lights just like jnellydodge describes in his post "Installed the smoked Recon lights". I ordered the smoked lights but the lenses look clear to me. The package was marked as being smoked for the 2001 Dodge. I'm not concerned because I am pleased with the turn-out. Looks like "Billy-Big-Rig"! Next plan is the amber running lights that mount below the doors, then air horn, 53 ft reefer trailer, CB radio, naked girl mud flaps...

Yes, the lights are amber.
10-4 Good Buddy!! Watch out for them smokies!!
 
Reply




All times are GMT -4. The time now is 02:25 PM.