Headers are in
Joined: Jun 2007
Posts: 34
Likes: 0
RE: Headers are in
Factory exhaust manifold torque specs are 20 ft./lbs. on the bolts and 15 ft./lbs. on the nuts. You probably don't need to check the torque as you most likely tightened them way more than that. I would check them every few days though for the first few weeks to make sure you don't develope an exhaust leak.
Thread Starter
|
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: Headers are in
ORIGINAL: 7secR/C
Factory exhaust manifold torque specs are 20 ft./lbs. on the bolts and 15 ft./lbs. on the nuts. You probably don't need to check the torque as you most likely tightened them way more than that. I would check them every few days though for the first few weeks to make sure you don't develope an exhaust leak.
Factory exhaust manifold torque specs are 20 ft./lbs. on the bolts and 15 ft./lbs. on the nuts. You probably don't need to check the torque as you most likely tightened them way more than that. I would check them every few days though for the first few weeks to make sure you don't develope an exhaust leak.