2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rear end rebuild kit

Thread Tools
 
Search this Thread
 
Old Jul 12, 2007 | 06:27 PM
  #1  
bridgway's Avatar
bridgway
Thread Starter
Joined: Jul 2007
Posts: 2
Likes: 0
Default Rear end rebuild kit

Anyone know a good place to get a kit for a 97, Ram, 2500, 2WD, Dana 60-4.10 rear end?

Thanks
 
Reply
Old Jul 12, 2007 | 09:31 PM
  #2  
DieselDemon's Avatar
DieselDemon
Record Breaker
Joined: Feb 2005
Posts: 1,325
Likes: 1
From:
Default RE: Rear end rebuild kit

That's not a Dana 70 back there?



Good luck with your ride.
 
Reply
Old Jul 13, 2007 | 05:07 PM
  #3  
bridgway's Avatar
bridgway
Thread Starter
Joined: Jul 2007
Posts: 2
Likes: 0
Default RE: Rear end rebuild kit

Dealer told me Dana 60-4.10

Thanks
 
Reply
Old Jul 13, 2007 | 08:27 PM
  #4  
DieselDemon's Avatar
DieselDemon
Record Breaker
Joined: Feb 2005
Posts: 1,325
Likes: 1
From:
Default RE: Rear end rebuild kit

Hmmmmm.................. Let me know if you confirm that.
 
Reply
Old Jul 13, 2007 | 08:43 PM
  #5  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default RE: Rear end rebuild kit

general info and links.
http://www.offroaders.com/tech/limit...ferentials.htm

parts
http://www.ringpinion.com
...on the left side of the screen, search by make/model to get pics of the covers. the 60 and 70 have very similar bolt pattern, but the dimensions of the case are different and the d70 is much taller. ask for people to post the height/width of their covers. i thought the D60 went in the gassers and D70 in the diesel. i could be all wrong.
 
Reply




All times are GMT -4. The time now is 10:44 PM.