2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

vaccume control arm

Thread Tools
 
Search this Thread
 
  #1  
Old 08-08-2007, 11:39 AM
bootleg233's Avatar
bootleg233
bootleg233 is offline
Thread Starter
Join Date: Aug 2007
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default vaccume control arm

Ok heres the deal the little arm that moves the vent position that attaches to the vaccume control motor under the dash (drivers side) its on the a/c evaporator case. Can someone tell me does it come off and how I dont want to force it and have to take the whole dash apart because I broke it worse because right now I'm thinking of just drilling a small hole in it and run wire through it to the arm on my control motor. I hate reaching under dash and pulling it down to have a/c blow out the center ecspecially if it can come off with a little twist or turn or jerk or prying or well u know. Anyway Thanks in advance.
It's a 98 Dodge Ram 1500 4x4

[IMG]local://upfiles/69301/EA3E14F4FB7149F4A96F0E53EF85BE70.jpg[/IMG]
 



Quick Reply: vaccume control arm



All times are GMT -4. The time now is 03:17 AM.