408 stroker kits
Thread Starter
|
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: 408 stroker kits
ORIGINAL: fcm42000
dude did you look at who started the thread
dude did you look at who started the thread
Thread Starter
|
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: 408 stroker kits
ORIGINAL: 98whitekota
do u guys know how the compter will react with the 408 stroker???
do u guys know how the compter will react with the 408 stroker???
I guess the krc is the best one out on the market? They are pritty reasonably priced.
All Star
Joined: May 2006
Posts: 994
Likes: 0
From: Belle Plaine, Minnesota
RE: 408 stroker kits
Go to the Fastman's website and talk to him. He knows a lot about these engines and stroker motors. Good source of info.
Trending Topics
Record Breaker
Joined: Feb 2006
Posts: 1,567
Likes: 0
From: Richmond, Va
RE: 408 stroker kits
ORIGINAL: 98whitekota
do u guys know how the compter will react with the 408 stroker???
do u guys know how the compter will react with the 408 stroker???
As far as a kit goes I would go to KRC. They have alot of experience putting different stuff together in these motors and will be able to tell you pretty accurately what compression ratio you will end up with. IMO, you don't want to spend all of that money and end up w/ 9.5:1, likewise you don't want to have to go to a racetrak everytime you need gas either.
All Star
Joined: Jul 2007
Posts: 781
Likes: 0
From:
RE: 408 stroker kits
ORIGINAL: mopowar
Either the M1 flash or the 408 flash from B&G will run a 408.
As far as a kit goes I would go to KRC. They have alot of experience putting different stuff together in these motors and will be able to tell you pretty accurately what compression ratio you will end up with. IMO, you don't want to spend all of that money and end up w/ 9.5:1, likewise you don't want to have to go to a racetrak everytime you need gas either.
ORIGINAL: 98whitekota
do u guys know how the compter will react with the 408 stroker???
do u guys know how the compter will react with the 408 stroker???
As far as a kit goes I would go to KRC. They have alot of experience putting different stuff together in these motors and will be able to tell you pretty accurately what compression ratio you will end up with. IMO, you don't want to spend all of that money and end up w/ 9.5:1, likewise you don't want to have to go to a racetrak everytime you need gas either.