maybe im just the lazy one and just stuck a breather on the end of the hose instead of prying stuff off. so if i sell the truck just pull breather out pop air box on and done lol.

 

I still didn't get it off, then again I worked all day and never really gave it a shot....What kind of breather did you put over it?

 

u have the breather on the left side, i hope mine on the right side doesnt break like that =X

 

I think I'm going to do this...
What is the throttle body spacer for?

 

Great writeup... I added this to the DIY list at the top already.

 

Thank you very much steve....make sure to check out my updates....

Cereal- I used the throttle body spacers to clear the throttle line and a vacuum line because my element was dipdish and not flat...Also, i dont suggest going bigger than 1/2 " or your going to have trouble with your S-Bolt going in...I tried [:'(]

 

can that be done in california?

 

[sm=forgetit.gif]
[sm=closed.gif] [sm=deadhorse.gif]

Stop! Already!

 

I hate to be a party pooper - but this has all been covered before....
This post is complete with part #s for everything you need to do it without a tb spacer and with a breather that fits in the grommet:
https://dodgeforum.com/fb.asp?m=732669

About 20 pages of info on the thread this post came from......

 

This was the topic I used for reference when installing mine. The big pictures are nice