2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Question about wheel fitting

Thread Tools
 
Search this Thread
 
Old Sep 7, 2007 | 06:16 PM
  #1  
Crazy J's Avatar
Crazy J
Thread Starter
Joined: Mar 2007
Posts: 23
Likes: 0
From:
Default Question about wheel fitting

Quick question: Will the wheels from a 2003 Ram 1500 fit on a 95 Ram 1500? Need to know ASAP.
Thanks,
-J
 
Reply
Old Sep 7, 2007 | 06:23 PM
  #2  
2500 mopar's Avatar
2500 mopar
Veteran
Joined: Aug 2007
Posts: 370
Likes: 1
From:
Default RE: Question about wheel fitting

not sure, use atape measure
 
Reply
Old Sep 7, 2007 | 06:25 PM
  #3  
Crazy J's Avatar
Crazy J
Thread Starter
Joined: Mar 2007
Posts: 23
Likes: 0
From:
Default RE: Question about wheel fitting

I don't have both sets of wheels to measure.
 
Reply
Old Sep 7, 2007 | 06:31 PM
  #4  
Crazy J's Avatar
Crazy J
Thread Starter
Joined: Mar 2007
Posts: 23
Likes: 0
From:
Default RE: Question about wheel fitting

Update to my question, I found that both trucks use 5 x 5.5 lug spacing. However, the newer bodied trucks use a 9/16 lugnut vs. 1/2 for the older style. How unsafe would it be to use them anyway?
 
Reply
Old Sep 8, 2007 | 12:32 AM
  #5  
spaz_22's Avatar
spaz_22
Captain
Joined: Feb 2007
Posts: 504
Likes: 0
From: Spokane WA
Default RE: Question about wheel fitting

you'd just have to get acorn style lugnuts that spread out farther then stock
 
Reply




All times are GMT -4. The time now is 09:53 AM.