Need a good source for diff parts
Thread Starter
Joined: Dec 2006
Posts: 40
Likes: 0
From: Central Maine
Need a good source for diff parts
Does anyone have a good,economical source for front (Dana 44/3.55)and rear (Corporate 9.25/3.55) differential parts such as rings and pinions, bearings, and seals?Thanks for any help.
Legend
Joined: Jul 2007
Posts: 7,843
Likes: 13
From: DFW, Texas
RE: Need a good source for diff parts
Thread Starter
Joined: Dec 2006
Posts: 40
Likes: 0
From: Central Maine
RE: Need a good source for diff parts
AAA,
I have a '95 Ram 1500 4WD. There is very noticeable up/down slop in the pinion bearings of both differentials so I am anticipatingrebuilds. The salvage yard wants $700 for a set of complete, usedaxles,so I'm going to determine if I can get rings/pinions, bearings, and sealsfor that much or less and rebuild them myself. Thanks to both of you for the parts sources.
I have a '95 Ram 1500 4WD. There is very noticeable up/down slop in the pinion bearings of both differentials so I am anticipatingrebuilds. The salvage yard wants $700 for a set of complete, usedaxles,so I'm going to determine if I can get rings/pinions, bearings, and sealsfor that much or less and rebuild them myself. Thanks to both of you for the parts sources.