2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Dragged the RAM

Thread Tools
 
Search this Thread
 
Old Nov 4, 2007 | 09:19 AM
  #1  
OZMarshy's Avatar
OZMarshy
Thread Starter
|
Rookie
Joined: Feb 2007
Posts: 51
Likes: 0
From: Queensland, Australia
Default Dragged the RAM

hey all,haven't posted for a while and thought i had a good reason to do so. well we local drags here on saturday and took both my bike and the dodge out for a run. it was only on a 1/8th mile due to the strip not being the best. had a few practices that weren't timed then did one timed which was a 10.somethingpass which was my only timed passgetting me second place in the car catagory.the bike did two timed passes with them being 7.15 and 6.97 giving me the fastest average and getting first place in the bikes. i thought not bad when they are stock standard vehicles with the dodge only having extractors as an enhancement.

Just sharing my good fortunes to all.

[IMG]local://upfiles/56821/8D67D04874E744439DD3B0615B9E96E8.jpg[/IMG]

[IMG]local://upfiles/56821/D1E11B82FF674987AB85CF9EAAC58174.jpg[/IMG]

[IMG]local://upfiles/56821/131C9C90C2DA4F928F1814D1338415A8.jpg[/IMG]
 
Reply
Old Nov 4, 2007 | 10:29 AM
  #2  
motorbrreath's Avatar
motorbrreath
Record Breaker
Joined: Jul 2007
Posts: 1,771
Likes: 0
From: Georgia
Default RE: Dragged the RAM

very nice.
 
Reply
Old Nov 4, 2007 | 01:57 PM
  #3  
greenmachine's Avatar
greenmachine
All Star
Joined: Mar 2005
Posts: 820
Likes: 0
From: Jax Fl.
Default RE: Dragged the RAM

ORIGINAL: OZMarshy

i thought not bad when they are stock standard vehicles with the dodge only having extractors as an enhancement.

Just sharing my good fortunes to all.

[IMG]local://upfiles/56821/D1E11B82FF674987AB85CF9EAAC58174.jpg[/IMG]
I dont know what Ram you have butmy stockwont do that! Soon very soon. lol
 
Reply
Old Nov 5, 2007 | 02:42 AM
  #4  
OZMarshy's Avatar
OZMarshy
Thread Starter
|
Rookie
Joined: Feb 2007
Posts: 51
Likes: 0
From: Queensland, Australia
Default RE: Dragged the RAM

well it is only over the 1/8th mile but i have the V10 so she has a bit of get up and go
 
Reply
Old Nov 5, 2007 | 06:05 AM
  #5  
IndyRamMan's Avatar
IndyRamMan
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
Default RE: Dragged the RAM

10.01 or 10.99? Not too shabby, what do you have done?
 
Reply
Old Nov 8, 2007 | 10:39 PM
  #6  
OZMarshy's Avatar
OZMarshy
Thread Starter
|
Rookie
Joined: Feb 2007
Posts: 51
Likes: 0
From: Queensland, Australia
Default RE: Dragged the RAM

not sure what speed but it is stock except for the headers
 
Reply




All times are GMT -4. The time now is 10:51 AM.