2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Horsepower/Torque Rating

Thread Tools
 
Search this Thread
 
Old Nov 4, 2007 | 12:23 PM
  #1  
Rammer1500's Avatar
Rammer1500
Thread Starter
|
Amateur
Joined: Feb 2007
Posts: 47
Likes: 0
Default Horsepower/Torque Rating

My truck is 100% stock and am wondering what the HP/Torque rating is for this truck...

 
Reply
Old Nov 4, 2007 | 12:34 PM
  #2  
THEGOLDPRO's Avatar
THEGOLDPRO
Captain
Joined: Oct 2005
Posts: 526
Likes: 0
From: southbury CT
Default RE: Horsepower/Torque Rating

DO A SEARCH!!!!!!!
 
Reply
Old Nov 4, 2007 | 01:46 PM
  #3  
Cereal Killer's Avatar
Cereal Killer
Champion
Joined: Feb 2007
Posts: 3,014
Likes: 5
From:
Default RE: Horsepower/Torque Rating

aww c'mon goldpro. This isn't pavementsucks.com we can be a little more constructive than that.

Rammer, with the 318 it's rated at 220 hp/300-310ft·lb
 
Reply
Old Nov 5, 2007 | 04:25 AM
  #4  
HankL's Avatar
HankL
Champion
Joined: Aug 2005
Posts: 3,313
Likes: 8
Default RE: Horsepower/Torque Rating

as a new owner it is always a good idea to read up on your engine and other components:

Here's a good spot to start:

http://dodgeram.org/tech/gas/specs/5_2v8.htm
 
Reply
Old Nov 5, 2007 | 11:27 AM
  #5  
Cereal Killer's Avatar
Cereal Killer
Champion
Joined: Feb 2007
Posts: 3,014
Likes: 5
From:
Default RE: Horsepower/Torque Rating

So the holly 50mm throttle body came stock with the 5.9? I always kinda thought that was an upgrade on mine since people talk about buyingfastman 50mm throttle bodies. What's the difference? I thought he bored them out to make them bigger. What else is involved?
 
Reply
Old Nov 5, 2007 | 02:02 PM
  #6  
BIGRED97's Avatar
BIGRED97
Captain
Joined: Sep 2007
Posts: 622
Likes: 0
From: Houston, TX
Default RE: Horsepower/Torque Rating

cereal i believe the stock is 50mm the fastman is bored out 52mm
 
Reply
Old Nov 5, 2007 | 02:23 PM
  #7  
OlsenG_360's Avatar
OlsenG_360
Professional
Joined: Mar 2007
Posts: 242
Likes: 0
From:
Default RE: Horsepower/Torque Rating

the stock tb blades are 50mm, but before the blades there is a bottleneck that gets down to almost 46mm.
 
Reply




All times are GMT -4. The time now is 04:22 PM.