2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Front end bushings

Old Dec 3, 2007 | 08:44 PM
  #1  
SilverRam_01's Avatar
SilverRam_01
Thread Starter
|
Captain
Joined: Jun 2007
Posts: 626
Likes: 0
From: Healdsburg, California
Default Front end bushings

Hey guys, a while back I posted in a thread about front tires rubbing on the lower control arm, and I've just gotten to wondering, my control arm bushings are shot, and I was wondering if anyone had heard of that causing the front tires inner edge to rub on the lower control arm. It ubs on the tire like a quarter inch above the bead lip. Its just goofy, on the driver side, at full left lock it rubs on the control arm and the lower shock mount, but on the passenger side, at full right lock, it barely touches the lower control arm. Just wondering if y'all had heard of this??
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:30 PM.