On my 01 Ram 5.9 gas I bought a couple months ago I noticed there is just a small hole (that is supposed to be there on the drivers side valve cover) with no filter or anything on it. Is this factory or did a snorkel/ filter thing fall off. Thanks

 

shooting to 2nd gen for more visability.

 

On one side, you should have a hole for the PCV. On the other side, you should have a hole for the tube that goes to the stock air cleaner assembly. It allows valve cover gases to be pulled back into the TB to be burned again instead of being released into the air.

 

Thanks drew , either a PVC or a crank case breather needs to go in there..

 

I think that was already mentioned above, but what the hell...
go ahead and take credit for it.

hahahahahahahaa

 

Thanks guys it was the PCV valve!!! i cant believe a dealer would sell me a truck without a pcv valve......... i guess the lesson learned is to never buy from Charlies Auto Village in Pelham NH.

 

Damn You !! ..LOL... hey sportram , it pays to look before you buy if they overlook at something as simple as that , what else was over look ? Good luck and there should be an emission sticker showing what goes in that spot on the rad suport...