I have a 95 grand cherokee 5.2 that is burning antifreeze so most likely it is a cracked head so i am taking the motor out of that and stripping it down and i plan to build it up and swap it into my ram 5.2. I am going to get a rotating assembly for it and get it bored out 30 over but im not really sure what would be my best bet with the rotating assembly. I want to get the most power out of that i can. Im looking for any advice on what heads and cam would be best for my application or any other suggestions on what i should put into the motor.
thanks for any help and if you need anymore info to help me out let me know.