So I installed a center console subwoofer box on my rig, its been on for a long time, and this is an issue I have had ever since I got it installed, but I haven't done anything about it, well, here goes, the little computer thing for the seatbelts that decides when to lock them up sits underneath the center console, so if Im ever driving and turn my stereo up even slightly, the sub rattles the sensor and sets it off, so my seatbelts all lock up to "keep the occupants safe" but its not very safe if they are locked up all the time, and aside from that, its quite irritating/ somewhat funny to screw with the passengers. Anybody got any ideas, I cant figure out anyway to move it because the cables that connect to it are completely extended and held from both sides from each seatbelt, should I just clip the cables and splice in more and place it somewhere else?

[IMG]local://upfiles/85407/86833372DB0E4F4BA0014DEA6F92FE8A.jpg[/IMG]

 

There's a rollover ball in a cage inside of it (that's the rattling sound it makes, i had to find out what it was so i opened it...) that's probably latching the belts. you'd probably be best off moving it, but that's a lot of wires...make surei t's upright wherever you do mount it though.