When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
is your rig 4wd? and if so you should at least change the shocks to a little stiffer shocks that should give you just slightly more height then they should work. they will probably rub when you turn and have some extra pressure on each side, but I know that you can shove up to 35's on a 4X4 dodge 1500 without lift, those rub a lot though. It should be fine though since they are only 10.5 wide
I agree, you'll probably be ok, as long as you are using stock wheels, Personally for like 100 bucks I would buy a 2 inch spacer, but thats just because I like that level look.