Well problem solved. Thanks for all of your help, P.B. you were right on the mark. I found the crankshaft sensor tested good when tested with a meter. However when I removed it to test it I found a large piece of a magnet stuck to it. Where the magnet came from I do not know. To test it remove the crankshaft sensor and leave it plugged in, turn the ignition on and pass a piece of metal like a putty knife across the end of the sensor, If the sensor is good you will hear the fuel pump cycle and a few relays click. Also if anyone else runs into a no start problem on a Ram a Dodge Tech told me that is real common for the ECM to lose its ground