Okay, so I was looking at replacing my cylinder heads for more free-flowing air to be put into the engine to get more power. I went onto a Mopar website and found some 1992 and Up R/T cylinder heads for my 5.9L 360.

Any opinions?

If so let me know what you think!

[IMG]local://upfiles/86644/71AABB671A7343C9AE9F9C3A88BFC61F.jpg[/IMG]

 

I don't know what your budget is but when its time to replace my heads I'm going with hughes iron ram heads.

 

take a look at these and give them a consideration:

http://chucker54.stores.yahoo.net/mosmblalcyhe.html

also inquire about adding an extra $300 for a matching cam and add $600 for an SCT tune and you'll be quite pleased with the results.

 

hugh's engines has a similar head that doesnt require all of the "add ons" listed @ chucker54's site. if your on a budget, look into that. www.hughesengines.com IIRC is the sight.