Kay finally removed that spacer the previous owner had on the ram unfortunately I dont have the stock tb to intake manifold bolts and need to know what the length is on the stock ones, I am tired of running to ace and was hoping someone on here can help me out, I know they are 1/2 found in the search but couldn't find the length....


trying to get this done before it starts raining again!

 

I know it's probably too late anyway (and you are all set), but I've been looking for 45 minutes for my old ones.When I got the Fastman it had new ones that came with it. I saved the old ones and for the life of me I can't find them, damn! I hate when that happens! LOL . Sorry

 

damnit! Nope still haven;t found the right size and am starting to get irritated, ace is such a damn drive for just 4 bolts! Even the stealership parts guys couldn't tell me....

 

I think I found them, they are 2 1/4 " from bottom of head to tip. By now you must have them though. They are also threaded all the way, most bolts you buy at HW store are only threaded a short amount.

 

Wiggles,

Take the ones from the TB Spacer and measure them, then subtract the TB spacer height and you should be good to go. They are threaded all the way through as zman stated.
Get them in 1/2" heads as that's what most of the engine mounting bolts are anyway and it'll be less swapping of sockets for a future engine teardown.