Quad HID Driving Lights Complete (56k Die)
Thread Starter
|
Banned
Joined: May 2008
Posts: 1,031
Likes: 0
From: The Communist Puppet State of Mexifornia
Quad HID Driving Lights Complete (56k Die)
I finally got around to finishing the HID setup on my Ram. I've got HID High's, as well as 55 Watt Hella 500's, and 35 Watt Hella 550's. All but the 500's are 5000k, the 500's are 4300k.
The electrical system I designed for this is quite complicated, involving 8 relay's as well as a remote controller I can elect to use. I built all of it into aluminum enclosure which I mounted on top of my fuse box.
Anyways, picture time.
Thoughts, comments?
The electrical system I designed for this is quite complicated, involving 8 relay's as well as a remote controller I can elect to use. I built all of it into aluminum enclosure which I mounted on top of my fuse box.
Anyways, picture time.
Thoughts, comments?
Thread Starter
|
Banned
Joined: May 2008
Posts: 1,031
Likes: 0
From: The Communist Puppet State of Mexifornia
There's no such thing as too much light.
Oh and for the record, in that second to last picture, the reflectors at the end of the road are the taillights of Philip Rivers' truck.
Funny guy he is.
Oh and for the record, in that second to last picture, the reflectors at the end of the road are the taillights of Philip Rivers' truck.
Funny guy he is.
Registered User
Joined: Oct 2008
Posts: 16
Likes: 0
From: PA
Trending Topics
Thread Starter
|
Banned
Joined: May 2008
Posts: 1,031
Likes: 0
From: The Communist Puppet State of Mexifornia
Haha, its honestly ridiculously easy. Take a Driving light of your choice, get an HID kit, insert HID bulb into driving light.
Done.
I'd do a DIY, but I don't want to disassemble any of the lights. I sealed them with Silicone.
Done.
I'd do a DIY, but I don't want to disassemble any of the lights. I sealed them with Silicone.
