Eelbrock intake
#14
They have the Edelbrocks at Advanced Auto . But , if you decide to get one at AZ or Advance , you'll need to get the plastic spacer kit also. The ones Advance have off the shelf are made for old school carb. motors with no sensors in the way. I think they are # 1220 or #1221 and have a 3/8 longer flange, and you'll need a half inch spacer. The ones AZ have you'll need a 3/4 or 1 inch spacer, I forget, tried them both. If you get the Mopar Performance or one from Jegs or Summit, you can get one with a deeper flange and not use the spacer(just use a 2.5 inch air filter) but I don't know the part #'s for those off hand.
#15
#18
i like the one hometheaterman has but im looking for more of the typical round style like... http://www.hawaiiracing.com/?page=sh...5db3cd51e351d& but without the chevy junk on it
#19
http://store.summitracing.com/partde...5&autoview=sku
Thats the intake I have, and doesn't require a breather. There is an attachment thing for the hose that attaches to the stock box. Just add your K&N filter, bend the s-rod, then your good to go. Look around you might be able to find it cheaper.
Thats the intake I have, and doesn't require a breather. There is an attachment thing for the hose that attaches to the stock box. Just add your K&N filter, bend the s-rod, then your good to go. Look around you might be able to find it cheaper.
#20