2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Standard Bumber/Hitch Towing-'98 Laramie

Thread Tools
 
Search this Thread
 
Old Dec 9, 2008 | 09:35 AM
  #1  
kinggabbo's Avatar
kinggabbo
Thread Starter
|
Registered User
Joined: Dec 2008
Posts: 2
Likes: 0
Default Standard Bumber/Hitch Towing-'98 Laramie

I am looking at purchasing a 98 Laramie quad cab with the 5.9L engine and was wondering how many pounds the standard bumper/hitch was rated to tow. Also, what class would the hitch be? The owner's manual has listings for I, III, and IV but doesn't say which is on the truck.
 

Last edited by kinggabbo; Dec 9, 2008 at 09:53 AM. Reason: corrected spelling error
Reply
Old Dec 9, 2008 | 09:18 PM
  #2  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

if the receiver tube is 2" square, then its probably a class 3, which is 500# tongue weight and 5000# total.

unfortunately, the transmission is only rated to tow about 5#...

welcome to df and good luck on your truck. don't overpay.
 
Reply
Old Dec 18, 2008 | 12:56 PM
  #3  
Gwub2005's Avatar
Gwub2005
Rookie
Joined: Jan 2008
Posts: 63
Likes: 0
From: Pensacola, Fl
Default

If ur talking about the bumper itsself its rated for 5000lbs w/ a 500lbs tongue weight its the same as a hitch.
 
Reply
Old Dec 18, 2008 | 01:18 PM
  #4  
Silver_Dodge's Avatar
Silver_Dodge
Grand Champion
Joined: Nov 2004
Posts: 6,099
Likes: 6
From: Colorado
Default

I thought the bumper was rated at only 2500 or 3500 lbs. I recall that it was far less then a normal class III hitch (at least on the 1/2 tons).
 
Reply
Old Dec 18, 2008 | 01:25 PM
  #5  
Gwub2005's Avatar
Gwub2005
Rookie
Joined: Jan 2008
Posts: 63
Likes: 0
From: Pensacola, Fl
Default

naw the bumper is rated for 5000 most all full size trucks are 5000. the rangers and s10s are usually 2000lbs same for dakota.
 
Reply
Old Dec 18, 2008 | 04:26 PM
  #6  
PurplDodge's Avatar
PurplDodge
Legend
Joined: Jan 2008
Posts: 8,321
Likes: 12
From: Indiana
Default

I think that my factory Mopar hitch is a Class 4.

The stock bumper is a Class 3 hitch
 
Reply




All times are GMT -4. The time now is 12:16 PM.