Anyone use single plane intake?
#11
#12
Hey Edelbrock makes one for our trucks and it aint that expensive. It is a direct bolt on replacement for our trucks. I emailed them b/c in the description it talked about 2 brl carbs. They emailed me back, said it was a typo and that it was for the stock 2 brl throttle body.........
http://www.jegs.com/p/Mopar+Performance/750418/10002/-1
http://www.jegs.com/p/Mopar+Performance/750418/10002/-1
#14
I chose this over the M1 because there were just too many complaints of lost bottom end with the M1 intake. I called Marty to get his opinion on what I should run given my setup and this is what he recommended.
that Edelbrock piece at Jegs is essentially what I've got but purdied up a bit. The only thing I see different is that the injector ports aren't angled toward the intake runner like they are on mine. But it looks to be a perfect bolt-up complete with all the bracket mounts and FI rail mounts. I can't say for certain, but it looks as if the runners are shared and I can't see a specific stepped divider in the inside like mine has. As to how that would affect performance, your guess is as good as mine.
that Edelbrock piece at Jegs is essentially what I've got but purdied up a bit. The only thing I see different is that the injector ports aren't angled toward the intake runner like they are on mine. But it looks to be a perfect bolt-up complete with all the bracket mounts and FI rail mounts. I can't say for certain, but it looks as if the runners are shared and I can't see a specific stepped divider in the inside like mine has. As to how that would affect performance, your guess is as good as mine.
Last edited by aim4squirrels; 01-05-2009 at 05:34 PM.
#15
with a 2 barrel m1,your bottom end loss would minimal at best.now to my knowledge people notice more bottom end loss with the 4 bbl.2bbl adapter..but in either one adding a turtle will bring back any and all bottom end loss..and theirs also a re-gearing to regain any and all bottom end loss..
but also member,with the m1 you will pull solidly up to 6,000..
but also member,with the m1 you will pull solidly up to 6,000..
#16