has anyone done this to their TB?
http://dodgetruckworld.tenmagazines....erformance_mod

 

You might want to do a search on this site before asking...I've already posted this recently.

 

i posted it again because i have a question goes with this.
if you look at the intake you will see the same thing. there is a lip that can be removed and open the ports to match the gasket.
but i have not seen anyone post anything on opening them up
like with the TB

 

i just smoothed mine a little

 

Hey Minis2003 dont bother looking at Timidone post under search cause it does not answer much other then talking about a bunch of rims and pictures of them. Come on Timidone try not to act like people are wasting their time asking questions, it what the forum is for and newer members dont know all the ins and outs yet.
Minis2003 I know what you are talkng about and dont know if anyone else has done this to their intake.

 

Here ya go:

https://dodgeforum.com/forum/2nd-gen...d-i-get-2.html

Starting about midway down.

 

ok i did hone the TB ports to 50mm with a dremel and i did notice a different tone coming from the exhaust port. still to soon to tell if there in an increase in power or MPG or smoothness the computer needs sometime to adjust to the new air flow.
also i will, after my paint dries on my intake, take a dremel and open up the ports, on top of the intake where the TB connect to, a little bit to 50mm or 53mm. enough to make the walls flushed and round the edges too.
after i finish i will post the a few pics here

 

That be great cause I got a spare TB to try this mod myself...any pointers would be great.

Sorry if my post above mislead you...I wrote incorrectly, I meant check forum NOT one that I have recently posted like I said but I knew the threads had already been talked about before and was just trying to help.

Like I said any directions or diy we can post on this site would be great.